C Series | Core Amplifiers

C2.6

Share this:

Core Series Amplifier

Linear with Aluminum toroidal transformer 
Low distortion Peak Limiter
Class H output stage (70% efficient) 
Protection, Soft-start, Short-circuit, Over-voltage, Over-current, Over-load, DC output, Temperature  
Simple layout and assembly for easy servicing 
Genuine parts exclusively provided by world class suppliers 
Compact and Lightweight 2U low depth format 
2 years warranty 
 

Core Series Amplifier

Linear with Aluminum toroidal transformer 
Low distortion Peak Limiter
Class H output stage (70% efficient) 
Protection, Soft-start, Short-circuit, Over-voltage, Over-current, Over-load, DC output, Temperature  
Simple layout and assembly for easy servicing 
Genuine parts exclusively provided by world class suppliers 
Compact and Lightweight 2U low depth format 
2 years warranty 
 

Max output Power EIA 1kHz 1% THD (EIA = 33ms ON / 66ms OFF) 2x 400W 8 ohms | 2x 600W 4 ohms | 1x 1200W 8 ohms (Bridge)
Overall gain 35dB (50 times voltage)
Sensitivity at 8 ohms 0.775Vrms (0dBu)
Signal to Noise Ratio (A weighted, 0 dB) >110dB
Frequency Response (-1dB) 20~20000Hz
Typical THD (half power, 1kHz, 8 ohms) <0.1%
Typical IMD (1kHz at 4:1, -20dB) <0.3%
Crosstalk (1kHz) >65dB
Slew Rate >15V/us
Input Impedance 20 kΩ
Damping factor (1kHz, 8 ohms) >500
Protections Soft-Start, Short-Circuit, Over-Voltage, Over-Current, Over-Load, DC Output, Temperature
Operating Voltage 190~260VAC 50-60Hz
Preamp Low noise and low distortion circuit, PeakStop Opto-Limiter
Power Supply (PSU) Linear topology with toroidal transforner
Output stage 2-step Class H without cross-rail distortion (70% efficiency)
Cooling Front to back airflow, Temperature regulated fans, Copper heat-sink for maximum heat transfer
Rear Panel 2 NEUTRIK XLR Input with latch, 2 NEUTRIK XLR Link ,2 NEUTRIK Speakon NL4, 2 speaker Binding post terminals, Stereo / Parallel / Bridge switch, Ground / Lift switch, Magnetic Breaker, PowerCon 20A (Included)
Speakon Wiring SPK1 = 1+1- CH A / 2+2- CH B | SPK2 = 1+1- CH B / 2+2- Not Used
Chassis 19" 2U height, 378mm total depth
Weight Net / Gross 14kg / 16kg

Designed for those who expect great power and performance, this amplifier will create sounds that resonate deep within the body, creating ultimate enjoyment for all ears. 

Suitable for:

  • Installation 
  • Multi-functional room
  • Auditorium and Theater
  • Pub
  • Bar
  • Commercial applications

CELTO Core Series Specs 2018-12-05.pdf
CELTO Core Series Specs 2018-12-05.pdf

RELATED PRODUCTS